NWE RF NODES
2.4GHz band |
Sub-GHz |
| SUPPLY VOLTAGE | SUPPLY VOLTAGE |
| 1.8 to 3.6 V | 1.8 to 3.6 V |
| TRANSMIT CURRENT ( AT +19DBM ) | TRANSMIT CURRENT ( AT +20DBM ) |
| 131mA | 135mA |
| RECEIVE CURRENT | RECEIVE CURRENT |
| 25mA | 35mA |
| POWER-DOWN COUNT | POWER-DOWN COUNT |
| <10 µA | <10 μA |
| FREQUENCY | FREQUENCY |
| 2.4 GHz | 865-867 Mhz, 915MHz, 433Mhz |
| MAXIMUM TRANSMIT POWER OUTPUT | MAXIMUM TRANSMIT POWER OUTPUT |
| 19 dBm | 20 dBm |
| RF DATA RATE | RF DATA RATE |
| 50 kbps | 50 kbps |
| MODULATION | MODULATION |
| 2GFSK | 2GFSK |
| RECEIVER SENSITIVITY | RECEIVER SENSITIVITY |
| -100.7 dBm | -120.6 dBm |
| SERIAL INTERFACE DATA RATE | SERIAL INTERFACE DATA RATE |
| Up to 115200 baud | Up to 115200 baud |
| OPERATING TEMPERATURE | OPERATING TEMPERATURE |
| -40 to 85 °C | -40 to 85 °C |
| ANTENNA OPTIONS | ANTENNA OPTIONS |
| Chip Antenna, Wire Antenna Helical | Chip Antenna, Wire Antenna Helical |
| ANTENNA CONNECTOR | ANTENNA CONNECTOR |
| MMCX (for external antenna) | MMCX (for external antenna) |
| SUPPORTED NETWORK TOPOLOGIES | SUPPORTED NETWORK TOPOLOGIES |
| Peer-to-Peer(P2P), Point to Multipoint(P2MP) & Mesh | Peer-to-Peer(P2P), Point to Multipoint(P2MP) & Mesh |
| NUMBER OF CHANNELS | NUMBER OF CHANNELS |
| 10 | 10 |
| ADDRESSING OPTIONS | ADDRESSING OPTIONS |
| PAN ID, Channel and addresses | PAN ID, Channel and addresses |
| INTERFACE CONNECTOR | INTERFACE CONNECTOR |
| 10 pin receptacles, 2.00mm pitch | 10 pin receptacles, 2.00mm pitch |
| COMMUNICATION PROVISION | COMMUNICATION PROVISION |
| RS232 (TTL level) | RS232 (TTL level) |
| DIMENSIONS (MM) | DIMENSIONS (MM) |
| 31×28 | 31×28 |
Description
Overview
IoT modules based on 6LoWPAN (sub-Gig & 2.4GHz bands) find their usage in wide range of Low power Mesh (or Canopy) networking applications like Home/Office/Factory automation, BMS, AMR/AMI/Smart Grid solutions, Smart city solutions etc. The module’s slim form factor makes it an ideal add-on for enhancing the intelligence of your device/ solution.
Key Features
- The protocol stack is based on standard IEEE 802.15.4g (IPv6)
- Supports Peer-to-Peer (P2P), Point-to-Multipoint (P2MP) and Mesh topologies
- 100 meters of LoS communication distance (can be extended using high power external antenna)
- Built-in Cryptographic Acceleration for AES 128/256 for data security
- Interoperability of the network with open source
- IPv6 having 128 bit addressing, facilitates large number of nodes
- Compatible for future Smart Grid & IoT (Internet of Things)
- Remote firmware upgradation
- Acknowledgment mode communication with retries
- Power saving modes for low power applications
- Source/ Destination addressing
- Unicast and Broadcast communication
- Digital I/O line support
- Default configuration for ready to use in Automated/Drive by Meter Reading
- Remote control, remote measurement system, Access control, Data Collection, Identification system, etc.
